 |
| Pipe Flange Aligner |
| #0721-0009 - Pipe Flange Aligner • Self-determining flange aligning tool makes fast, accurate pipe construction possible • Inserts easily into pipe, centers snugly against inside pipe diameter and automatically aligns with the pipe axis • Quickly adjustable for all types of flanges or pipe sizes ranging from 3” – 12” diameter |
| |
| Base SKU:0721-0009 |
| In Stock:Yes |
| Price: $80.00 |
| |
|
|
|
|
 |
| Flange Aligner Base |
| #0721-0029 - Flange Aligner Base • Simple tool removes difficulty of flange aligning and squaring by holding a square in needed position without tying up one’s hands • Notched at either end for ease in aligning on centerline of pipe • Two 25 lb. pull, cast-in magnets hold either a flat horizontal or vertical position • Accepts either leg of a standard or combination square • Works on pipe diameters 1” and larger, requiring only extension of the legs of the square to accommodate larger diameters • Square not included |
| |
| Base SKU:0721-0029 |
| In Stock:Yes |
| Price: $80.00 |
| |
|
|
|
|
 |
| Magnetic Burning Guide |
• Designed for use with a burning torch or as a straight edge
• Base has three cast-in 30 lb. pull magnets for use in any position
• 24” blade can be extended to an overall length up to 72” with attachments
• Durable material withstands heat and spatter |
| |
| Base SKU:0721-0025 |
| In Stock:Yes |
| Price: $60.00 |
| |
|
|
|
|
 |
| Pro-Mag Burning Square |
• Cast aluminum construction
• Precision tool for structural thermal cutting and layout
• Perfect square base and powerful cast-in magnets permit placement in any position
• Blade will accept attachments or extensions that allow an overall length up to 72”
• Tool surface embossed with protractor inscribed with two 90º quadrants graduated in 1º increments
• Top of tool carries 18” ruler blade divided in 1/8” increments on a raised plane for use as a straight edge when flame cutting |
| |
| Base SKU:0721-0020 |
| In Stock:Yes |
| Price: $90.00 |
| |
|
|
|
|
 |
| Standard Centering Head |
| #0721-0005 - Standard Centering Head Curv-O-Mark Centering Heads aid in the setting of centerlines, establishing angles and marks for butt-ins, locating points inside pipes and tanks, laying out keyways and measuring declivity. The Standard Model (shown above) is used on pipe 1/2-in. diameter and larger. It has a 4-in. Y-type head and is fitted with an adjustable dial bubble protractor (DSL) and a manually operated hardened centering pin. |
| |
| Base SKU:0721-0005 |
| In Stock:Yes |
| Price: $75.00 |
| |
|
|
|
|
 |
| Contour Jumbo Centering Head |
| #0721-0006 - The Jumbo Centering Head is for pipe 1-in. diameter and up. It has an 8-in. Y-type head, and a DSL. A spring loaded hardened centering pin eliminates the need for a hammer. Just make the alignment and press the trigger. |
| |
| Base SKU:0721-0006 |
| In Stock:Yes |
| Price: $85.00 |
| |
|
|
|
|
 |
| Contour Dial-Angle-Flange Level |
| #0721-0017 - Dial-Angle-Flange Level A versatile tool that can be used as a dial degree utility level or with attachments for two-holing flange alignment. The unit is made of cast aluminum with a protective housing containing an adjustable DSL.One of the nut and bolt units is stationary, while the other slides up to 5½ inch along a slot in the level to accommodate various flange bolt hole spacings from 2 to 5½ inches. The body of the tool is ½ inch thick with a machined surface. |
| |
| Base SKU:0721-0017 |
| In Stock:Yes |
| Price: $70.00 |
| |
|
|
|
|
 |
| Contour Universal Level |
| #0721-0030 - The Curv-O-Mark® Universal Level is a multipurpose tool. The unit features a 360º adjustable protractor dial bubble (DSL) of laterals to a precise degree. Designed primarily for pipefitting applications, the Universal Level is a valuable tool for any craft required to use a level or a plumb bob for structural ironworkers. The powerful holding magnets provide an extra hand. |
| |
| Base SKU:0721-0030 |
| In Stock:Yes |
| Price: $90.00 |
| |
|
|
|
|
 |
| Pro-Mag Level |
• Cast aluminum construction
• Precision tool for structural thermal cutting and layout
• Perfect square base and powerful cast-in magnets permit placement in any position
• Blade will accept attachments or extensions that allow an overall length up to 72”
• Tool surface embossed with protractor inscribed with two 90º quadrants graduated in 1º increments
• Top of tool carries 18” ruler blade divided in 1/8” increments on a raised plane for use as a straight edge when flame cutting |
| |
| Base SKU:0721-0007 |
| In Stock:Yes |
| Price: $60.00 |
| |
|
|
|
|
 |
| Contour Marker |
| #0721-0000 - Contour Marker • Compact, time-saving tool for laying out pipe from 1 ½” – 18” diameter and structural steel joints up to 18” • Laterals at any angle, tees, wyes, crosses, and elbows • Eliminates complex math formulas • Calibrated on both sides – one in degrees, the other in rise-inches-per-foot – to service any type of measurement needed • Durable, lightweight aluminum requires minimal maintenance • Folds easily into a compact tool that fits into a pocket or carrying case • Leather carrying case available • Capability can be increased with Combination Adaptor Accessory • Soapstone crayon included |
| |
| Base SKU:0721-0000 |
| In Stock:Yes |
| Price: $120.00 |
| |
|
|
|
|
 |
| Jumbo Contour Marker |
| #0721-0003 - Jumbo Contour Marker • Can be used in the layout of extremely large structural steel members up to 48” wide • Eliminates complex math formulas • Includes a durable web strap to hold unit in place during layout • Built-in adjustable dial bubble protractor ensures accurate center-line location • Durable, lightweight aluminum requires minimal maintenance • Capability can be increased with Combination Adaptor Accessory • Soapstone crayon included |
| |
| Base SKU:0721-0003 |
| In Stock:Yes |
| Price: $235.00 |
| |
|
|
|
|
 |
| Contour Circle-Ellipse Projector |
| #0721-0014 - Circle-Ellipse Projector Perfect circles, ellipses or oblong circles can now be easily made on any irregular flat or round surface. The Projector features a protractor with sliding rods and an adjustable lever to lock in the specified layout. A strong, 20-pound pull magnetic base holds the Projector in position during layout. A durable web strap (included) holds the unit secure on non magnetic surfaces and can be used on either side of the vertical column. The Projector can also be used to lay out lateral intersections of different diameter pipes, or to project circles from 1-1/2 to 18 in. diameter on flat surfaces intersecting at angles from 0 to 70 degrees from vertical. Attachments to develop larger diameter circles are available. The Projector is equipped with a soapstone crayon and also works with chalk, pencil or steel scribe. |
| |
| Base SKU:0721-0014 |
| In Stock:Yes |
| Price: $245.00 |
| |
|
|
|
|
 |
| Contour Fitter-Welder Protractor |
| #0721-0008 - Fitter-Welder Protractor Construction: Light Weight Aluminum 6This 90-degree protractor has a matching locking lever to set and hold the tool at the desired angle. It is equipped with a 5/8 in. by 10 in. tapered arm to complete finding of angles or desired bends, or to determine any portions of elbows. The tool is mounted in a 3/4-in. wide frame with a 3/8-in. by 6-in. cast-in rod. It comes with a 25-pound pull magnetic base for holding the protractor frame in position. The unit can be used manually or with a magnetic base. |
| |
| Base SKU:0721-0008 |
| In Stock:Yes |
| Price: $62.00 |
| |
|
|
|
|
 |
| Radius Markers |
| Four sizes available for scribing circles up to 80” in diameter • Folding design – three smaller models fit in a shirt pocket • Sturdy friction joints maintain rigidity and accuracy • Lightweight, rustproof aluminum construction for long wear • Will accept round, square, or flat soapstone crayon, pencill or steel point scribe • Soapstone crayon included |
| |
| Base SKU: |
| In Stock:Yes |
| Price: $20.00 |
| |
|
|
|
|
|
|
|
 |
| Contour Replacement Dial Set Level |
| #0722-0000 - Dial Set Level replacement part for standard and jumb centering heads, universal level, dial angle flange aligner and pro mag level |
| |
| Base SKU:0722-0000 |
| In Stock:Yes |
| Price: $25.00 |
| |
|
|
|
|
|
|
|
 |
| Round Soapstone Holder |
| #0721-0023 - Round - For the protection of soapstone crayons, durable aluminum case |
| |
| Base SKU:0721-0023 |
| In Stock:Yes |
| Price: $4.00 |
| |
|
|
|
|
 |
| Flat Soapstone Holder |
| #0721-0024 - Flat - For the protection of soapstone crayons, durable aluminum case |
| |
| Base SKU:0721-0024 |
| In Stock:Yes |
| Price: $3.00 |
| |
|
|
|
|
 |
| Wrap A Round |
Inexpensive tool for marking straight lines around pipe or for use as a straight edge • Flexible gasket material construction with good resistance to heat and cold • Available in two asbestos-free styles to designate service temperature – Black (B) for use up to 350ºF, • Four standard sizes available • Specially ordered Wrap-A-Rounds available in any length up to 375’ • Extra small and special order Wrap-A-Rounds unmarked, all others imprinted in inches (3.88” and 5” in inches and millimeters) |
| |
| Base SKU: |
| In Stock:Yes |
| Price: $8.00 |
| |
|
|
|
|
Contour
