 |
| Magnetic Blocks |
Model #3-28
These new magnetic support blocks can be attached to any standard square to form your own burning guide. Also use them to hold your square for various jobs.
Attach to any straight edge up to 1/8" thick to form your own burning guide.
Three blocks to a set. |
| |
| Base SKU:3-28 |
| In Stock:Yes |
| Price: $45.00 |
|
| |
|
|
|
|
 |
| New Circle Wiz |
• Made of solid brass and steel
• The universal brass bushing will adapt to any size or make of cutting torch.
• The Circle Wiz will cut holes from 5/8” inch diameter to 12” inches in diameter.
• It is especially handy for cutting out the holes for matching saddle cuts, weldolets and threadolets
• Simply slide the hardened center pin along the hex arm to attain the proper radius of hole desired
• Place the sharpened point in your center mark and you are ready to cut.
• Circle Wiz cutting attachment is a must for anyone who cuts small to medium holes in plate or pipe
|
| |
| Base SKU:CW-300 |
| In Stock:Yes |
| Price: $45.00 |
|
| |
|
|
|
|
 |
| Chariot Cutting Guide |
| #24219 - Flange Wizard’s new multi purpose “Chariot Cutting Guide” is a must for every tradesmen who uses a cutting torch. Standard Model will cut circles up to 39” inches diameter. Cut straight , irregular shapes, circle and bevel with this new versatile tool. • Brass construction at heat stress points. Universal bushing fits all torches |
| |
| Base SKU:24219 |
| In Stock:Yes |
| Price: $70.00 |
|
| |
|
|
|
|
 |
| Magnetic Torch Guide |
|
For Straight or Bevel Cutting
New improved magnetic Torch Guide has adjustable holding blocks and cutting rail extensions available that allow you to add all the length you need for those special cutting jobs.
- The cutting guide is stainless steel and works with conventional or plasma torches.
- The basic model 12340 is 24" in. length with two adjustable magnetic holding blocks.
- 24" Extension. Each extension comes complete with one 5" long magnetic connector block.
|
| |
| Base SKU:12340 |
| In Stock:Yes |
| Price: $65.00 |
|
| |
|
|
|
|
|
|
|
 |
| Magnetic Circle Layout & Cutting Guide |
| #28439 - Magnetic Circle Layout & Cutting Guide As a circle layout tool with sliding soapstone holder and 360° scale on the magnetic base. Will cut circles up to 30” inches diameter. Bolt circles, holes locations, baffle plate placement and circle sectioning for any number of reasons is a snap with Flange Wizard’s layout scale and sliding soapstone holder. As a circle burning guide use this same tool to cut a round plate, simply place the sharpened pin of the layout tool into your center punch mark and let the magnet slide down to sit firmly on the work surface. The magnet is strong enough to support the weight of your torch, which frees your hands for more cutting control. |
| |
| Base SKU:28439 |
| In Stock:Yes |
| Price: $75.00 |
|
| |
|
|
|
|
 |
| Multi-Use Angle Burning Guide |
| #70001 - Multi-Use Angle Burning Guide With a magnetic base is a must for every person who uses a conventional or plasma torch and wants an excellent angle or straight cut every time. It can also be used as a protractor, or as a multi-angle tri-square. It will hold any standard square as well as most straight edges. Special squaring and marking jobs are a snap with this multi-use tool. |
| |
| Base SKU:70001 |
| In Stock:Yes |
Regular Price: $115.00
On Sale For: $99.00 |
|
| |
|
|
|
|
 |
| Magnetic Standard Centering Head |
NEW STANDARD CENTERING HEAD IS NOW MAGNETIC!
• This tool is a must for the welder or fitter’s toolbox.
• Easy to replace 360° vial makes it a snap to repair.
• The 2-1/2° increments are stamped in the main body for lasting service.
• It is machined from quality aluminum material, then anodized for lasting protection.
• Use it as a protractor level, or remove and use the hardened center punch for other marking jobs.
•“Y” shaped body is designed to establish and mark a centerline at any angle around the circumference (inside or outside) on a pipe or tank
|
| |
| Base SKU:53076M |
| In Stock:Yes |
| Price: $70.00 |
|
| |
|
|
|
|
 |
| Small Centering Head Tool |
| #53025 - The new "Small Centering Head Tool" has a one piece "Y" shaped body like our standard model, only smaller. It is designed for the person who works with smaller diameter pipe. Fire protection contractors, fence and gate builders, live stock pens and corrals are a few of the many uses for the "Small Centering Head tool". It is machined from quality aluminum material, then anodized for lasting protection. Use it to establish and mark a centerline at any angle around the circumference on a pipe or tank. Use it as a protractor level on various alignment jobs in the automotive field. It's a great addition to any tradesmans toolbox. |
| |
| Base SKU:53025 |
| In Stock:Yes |
| Price: $60.00 |
|
| |
|
|
|
|
 |
| Lil' Wiz Case |
|
This is a great kit for anyone who burns holes (5/8” to 10" dia.) in pipe, plate or structural steel
Case #8902 (13"L x 8"W x 3" Deep) includes:
-
1 – Circle Wiz # CW-300
-
1 – Combo Degree Level #L-2 (pocket size, magnetic, with 2-1/2° increments)
-
1 – Small Magnetic Centering Head # 53025-M (marks any degree needed around circumference of a bar or pipe)
-
1 – Magnetic Tape Holder # 89754 (third hand when working alone)
-
1 – Flange Wizard Tools Catalog
- 1 –
FREE BONUS Vial Repair Kit # 5102
|
| |
| Base SKU:8915 |
| In Stock:Yes |
| Price: $175.00 |
|
| |
|
|
|
|
 |
| Pipe Magicians Case |
|
A person who works with pipe needs the finest tools available and a way to protect them when not in use. The four (4) quality tools in this case are a must when working with pipe.
Case # 8900 (15"L x 10"W x 3-1/2" Deep) includes:
-
1 - Pipe Flange Aligner # 38240-T,
-
1 - Standard Magnetic Centering Head # 53076-M
-
1 – Pocket Pro Level # PP-200
-
1 – Small Wizard Wrap # WW-16
-
1 – Flange Wizard Tools Catalog
-
1 - FREE BONUS Vial Repair Kit # 5102
|
| |
| Base SKU:8905 |
| In Stock:Yes |
| Price: $245.00 |
|
| |
|
|
|
|
 |
| Wizard Burning Guides |
|
Wizard Burning Guides
Case # 8910 (15"L x 10"W x 3-1/2" Deep) includes:
-
1 – Chariot Cutting Guide #24219-11 (will cover straight and radius cuts along with hole burning from 5/8" to 30" diameter.
-
1 – Magnetic Base w/Straight Pin #3105 (for larger holes and radiuses
-
1 – Magnetic Blocks #3-28 (great for clamping on squares and straight edges)
-
1 – Magnetic Tape Holder #89754 (third hand when working alone)
-
1 - Flange Wizard Tools Catalog
-
1 – FREE BONUS Torch Tip Standoff #70501 (protects torch tip end by controlling the distance from the material)
|
| |
| Base SKU:8910 |
| In Stock:Yes |
| Price: $199.00 |
|
| |
|
|
|
|
 |
| Magnetic Miter Marker |
Magnetic Miter Marker #63803
New & Improved!!
-
Completely redesigned and includes a magnetic base, making structural beam layouts and marking angles or saddles on pipe and tubing a snap. (Structural Adapter is included)
-
No extra combo adapters to buy!
-
Unique design allows telescoping out over existing welds to layout angles or change angles of pipe fittings
-
Marking arm is completely separate from main body and has it's own 360° rotating shaft with built in leveling vial
-
The Arms have spring loaded joints for smooth & precision operation
-
Size range: 1½ to 12" pipe and up to 12" structural beams
-
NEW "Sight Unseen" magnets are built right into the main base legs
-
Sturdy snap latch polypropylene case included!
|
| |
| Base SKU:63803 |
| In Stock:Yes |
| Price: $180.00 |
|
| |
|
|
|
|
 |
| Pocket Pro Level |
Features:
- 9” long and 1 ½" ” wide for easy handling and storage
- Extra strong magnet will hold it firmly to any steel surface.
- The dial is in 2 ½" degree increments with spring tension for easy operation.
- Two stationary vials are placed at 90 degree angles of each other and can be easily replaced if broken.
|
| |
| Base SKU:PP-200 |
| In Stock:Yes |
| Price: $65.00 |
|
| |
|
|
|
|
 |
| Accessory Degree Level |
• Pocket size with magnetic base
• Pocket size level is 2 decline or slope.
• Pocket level is 2 3/8” long and 11/2” wide.
• Tool is permanently marked in 21/2 degree increments
• Combination degree level makes it easy to establish angles and mark for butt-ins, set tanks, layout keyways and measure decline or slope.
|
| |
| Base SKU:L-2 |
| In Stock:Yes |
| Price: $40.00 |
|
| |
|
|
|
|
 |
| Torch Tip Standoff |
| #70501 - Torch Tip Standoff A must for anyone who uses a cutting torch and wants to keep their tip at the proper burning height at all times. Not only will it assist you in making more uniform cuts, but will keep your cutting tips from being damaged and always ready for your next burning job. Fits most cutting tips. Use with Magnetic Torch Guides, Straight Edges & Clamped Guides. |
| |
| Base SKU:70501 |
| In Stock:Yes |
| Price: $18.00 |
|
| |
|
|
|
|
 |
| Master Marker |
• Great for marking angles on structural steel.
• Main body has its own leveling system built-in and a strong magnetic base that works like a third hand.
• Marking arm holder telescopes and rotates 360° to allow the marking of larger pipes and fittings.
• Hook adapter on a straight edge and mark your degree of cut with ease.
• Structural Adapter included - Even though you don’t need an adapter for marking pipe, adapter is for marking
H-beams, I beam, angle iron, plate and square tubing makes the job a lot easier.
|
| |
| Base SKU:MM-500 |
| In Stock:Yes |
| Price: $215.00 |
|
| |
|
|
|
|
 |
| Pipe Flange Aligner Slotted Pins |
| #38240 - Pipe Flange Aligner Slotted Pins Model This model features slotted pins with "friction fitting" knurled nuts for flanges to 30" - 150 lbs. Fits flanges with holes 1/2" to 1 7/16" diameter. All models now come with 360 degree vials that just "snap" in and out for easy replacement. The Pipe Flange Aligner saves valuable fit-up time, in most cases it cuts fit-up time in half and eliminates the frustration of balancing a level on the pins. |
| |
| Base SKU:38240 |
| In Stock:Yes |
| Price: $75.00 |
|
| |
|
|
|
|
 |
| Pipe Flange Aligner Threaded Large Pins |
| #38240-TL ~ Pipe Flange Aligner Threaded Large Pins Model. This is our largest model. Fits flanges with holes 1/2" to 1 15/16" diameter. All of the above models of the Pipe Aligner will two-hole (make 2 holes of the flange horizontally level with the ground) and vertically level the face of the flange in ONE easy step. All models now come with 360 degree vials that just "snap" in and out for easy replacement. The Pipe Flange Aligner saves valuable fit-up time, in most cases it cuts fit-up time in half and eliminates the frustration of balancing a level on the pins. |
| |
| Base SKU:38240-TL |
| In Stock:Yes |
| Price: $90.00 |
|
| |
|
|
|
|
 |
| Pipe Flange Aligner Threaded Pins |
| #38240-T ~ Pipe Flange Aligner Threaded Pins Model This model has pins which are threaded for flanges to 30" - 150 lbs. Fits flanges with holes 1/2" to 1 7/16" diameter. All models now come with 360 degree vials that just "snap" in and out for easy replacement. The Pipe Flange Aligner saves valuable fit-up time, in most cases it cuts fit-up time in half and eliminates the frustration of balancing a level on the pins. |
| |
| Base SKU:38240-T |
| In Stock:Yes |
| Price: $75.00 |
|
| |
|
|
|
|
Flange Wizard Tools-"The Welders Choice for Quality" Since 1981
