• Work in Yards, Feet-Inch-Fractions, Area, Volume, Weight and Loads
• Automatic Square-ups and Drops
• Rebar solutions including Inset and Weight
• Complete Stair Layouts; set Riser Height and
• Tread Width
• Equal sided Polygons
• Blocks and Footings
• Circles: Arc, Column, Cone, Much More!

Electrical Code Calculator, Compliant with 2005, 2002, 1999 and 1996 NEC^® 

• Wire Sizes
• Integrated Voltage Drop
• Conduit Sizing
• Motor Full-Load Amps
• Fuse and Breaker Sizes
• Service and Equipment Grounding Conductor Sizes
• Enter BTU to find Kilowatts per Hour
• Enter Kilowatts per Hour to find BTU
• Parallel Resistance
• NEC^®  Table Number displayed when performing Wire Size calculations
• Ohm’s Law Calculations – enter any two values to solve for the third
• Circular MILS wire sizes

Electrical Contractors, Designers, Electricians and Lighting Specialists solve tough electrical calculations in seconds and deliver those solutions in conformance with the latest NEC^®.  The ElectriCalc^® Pro is a complete electrical reference tool that will save time, trouble and money.  Update to future code revisions with an easy-to-install kit.   Includes Armadillo Gear™ protective Hard Case.

Yard, Feet-Inch-Fraction, Metric, Heavy Construction-Math Calculator

• Work in and convert between Yard, Feet-Inch-Fraction and Metric formats!
• Automatically calculate Areas and Volumes!
• Square-ups and Right Angles; Percent Grade and Slope; stakeout Drops, Ramps, Trenches, much more!
• Weight per Volume (Lbs, Tons, Kg)!
• Find percent (%) Swell and Shrink!
• Simplify Cut/Fill Estimates!

The HeavyCalc™ Pro is the only Construction-Math Calculator designed for Engineers, Designers, Excavators, Highway and Heavy Construction Professionals.  Save time, eliminate costly errors, reduce material and labor expenses. It is the most effective equipment, manpower planning and estimating tool you can own!

Materials Estimating Calculator

• Work directly in Yards, Feet, Inches, Fractions and Meters – including Square and Cubic formats. No need to convert to decimals.

• Convert between all standard building math dimensions.

• Define and store values for materials such as Grout, Fence Post Spacing, Custom Tile, Board Width, Bags of Concrete, Paint Coverage and more.

• Calculate Board Feet and Cost per Unit.

• Quick Linear, Area and Volume answers.

• Solar/Dual Powered

For Contractors, Trades people and Estimators who need to estimate materials and costs for Concrete, Fences, Decks, Bricks, Tile, Flooring, Gravel, Painting, Drywall and Paneling and more.

With the Material Estimator you can quickly and easily calculate Yards, Feet, Inches, Fractions and Meters and material costs and allowances to get exactly the materials you need. Prevent estimating errors and save time and money.

Quickly and accurately find material requirements for studs; 4x8, 4x9, 4x10, 4x12 sheets; board feet, floor tiles, blocks, bricks, gravel and paint, and more.

Advanced Pipe Trades Math Calculator

Gives you instant answers for all your pipe layout and design problems, including complex rolling offsets, parallel pipe cutbacks, weight/volume conversions, flow rates, pressures, areas and more.

With the Pipe Trades Pro you’ll spend less time calculating and looking at charts and more time cutting, welding and placing pipe.

Calculations

• Right Angles, Offsets, and Complex Rolling Offsets
• Fitting Angles, Bends, Slopes Percent Grades, Drops
• Parallel Pipe Cutbacks
• Feet-Inch-Fractions and Trigonometry
• Pipe Areas, Fill Weights
• Flow Rates, Velocity, Force, Volumes
• Pressure Loss for any Pipe Size, Type or Distance
• Complete Building, Plumbing and Metric Unit Conversions

Built-in Pipe Data

• Choose a Pipe Material and Pipe   Type and enter Size and get Diameters, Wall Thickness, Filled Weight per Foot, Internal Area.
• Seven different Pipe Materials: Steel, Stainless Steel, Brass, Aluminum, Cast Iron, Plastic, Copper.

For:  Pipefitters, Steamfitters, Sprinklerfitters and Welders

Flow and Dimensional Math Calculator

The PlumbingCalc™ Pro is designed for today’s plumbing professionals – those who design, build and retrofit plumbing systems.

The new PlumbingCalc Pro is powerful, rugged and easy to use. It gives you instant answers to all your layout and design problems, including flow rates, pressure drops and more.

Calculate Volumetric Flow Rates, Pressure, Force and Area. Select Pipe Material and Type, then enter Pipe Size and instantly display O.D., I.D., wall thickness, internal area, and weight per foot. Solve right-angle math with built-in Offset, Run and Travel functions. Get all these calculations and more on the jobsite or in the office.

With the PlumbingCalc™ Pro you'll spend less time calculating, converting and looking at charts, and more time working at your trade – reducing costly material waste and increasing your hourly productivity and profits on every job.

• Over 400 Conversion Combinations
• More than sixty Standard U.S. and Metric Units Built-in!
• Easily Calculate Linear, Area and Volume Measurements
• Find Dry and Liquid Weight per Volume
• Solve for Velocity, Flow Rate, Pressure, Temperatures and More!

The Ultra Measure Master® is the most complete and easy-to-use U.S. Standard to Metric conversion calculator available for Engineers, Architects, Construction Pro's, Scientists and Students.  Convert more than 60 imperial and Metric (si) units – over 400 conversion combinations with a touch of a few buttons!  Forget complex scientific calculators or memorizing conversion formulas!  The Ultra Measure Master meets federal highway metrication requirements.

The One-Person Digital Measuring System

• Just roll and label distances as “Length” or “Width” to find Area, or store and recall later
• Displays measurements in Feet-Inches, Decimal Feet, Inches, Yards, Meters and Acres
• Built-in user Memory for accumulating counts, Linear, Square or Volume for up to nine separate Areas
• Large, Easy-to-Read backlight LCD display

True Laser Measuring – Easy to Use, Fast and Precise

Measures to 100-feet with accuracy of 1/8-Inch or better over the entire range

Real Estate Agents/Brokers and Appraisers, Contractors/Builders, Carpenters, Plumbers, Interior Designers, Remodelers, Estimators, Do-It-Yourselfers, Painters -- Anyone Who Needs Laser Accurate Measurements

The PREXISO X2 is a one-person laser measuring tool for distances, areas and volumes. It is easier and faster to use than a tape measure, and more accurate than ultrasonic measures. Great for measuring in crowded rooms or measuring inaccessible areas. It is about the size of a modern cell phone, and can be used for real estate, interior design, building, wallpapering and painting, laying tile and carpeting, and more.

If It Needs To Be Measured, Reach for Your Prexiso X2

• Measure distances, areas and volumes for material estimates.
• Determine placement and fit for room furnishings and cabinetry.
• Measure windows and window coverings.
• Measure hallways, rooms, floors for floor covering.
• Measure in attics and crawlspaces for insulation and ductwork.
• Determine if a room is square.
• Measure distances for placement of safety equipment.
• Measure walls, ceiling of a room to estimate paint required.
• Place electrical receptacles to meet code.
• Measure distances for HVAC duct placement.
• Measure distances between sprinkler heads for irrigation.
• Measure horizontal roof lengths for installing rain gutters.
• Measure room for home theater to ensure proper placement of audio/video equipment.

The affordable Scale Master® Classic is designed for building, engineering and construction professionals. Obtain fast, accurate Linear, Area and Volume take-offs from blueprints, drawings and maps. It features seventy-two built-in scales – 6 custom scales and 2 built-in memories. A ‘Lock switch’ holds a Mode or Scale in either Metric or Imperial dimensions. It is an ideal tool for preparing bids and estimates in the field or office.

It helps you:

• Dramatically Cut Take-Off Time
• Speed Estimates
• Improve Profit
• Reduce Errors
• Improve Crew Productivity
  

For Contractors, Estimators, Engineers, Landscapers, Pipeline Builders, Excavators, Concrete Contractors, Plumbers, HVAC Contractors, Fencing Specialists, Telecommunication and Cable System Contractors, Pavers, Electrical Contractors or anyone needing fast, accurate takeoffs from plans and blueprints.

Includes:

• Soft Vinyl Protective Pouch
• Complete User’s Guide
• (2) Long-life Lithium Batteries (CR-2430)
• Full One-year Limited Warranty

Linear Digital Plan Measure

• Dramatically Cut Take-Off Time
• Speed Estimates
• Improve Profit
• Reduce Errors
• New ergonomic design makes it more comfortable to hold, easier to use
• Dual LCD displays Scale/Mode and Measurements

Thousands of construction pro's use the Scale Master® series of digital plan measures to prepare bids faster and more accurately. Perform take-offs with speed and confidence. Instantly double-check plans. Reduce estimating errors and improve profits.

At the estimating table or in the field, the Scale Master® Pro is an "all-in-one" take-off tool with architectural, engineering, map and metric blueprint scales built in! Plus, a custom set scale capability for working with plans that are out-of-scale.

#6135  Scale Master® Pro XE

Advanced Digital Plan Measure with PC Interface

• Complete takeoffs with speed and accuracy
• Reduce errors in estimates and bids
• Improve productivity and maximize profitability
• Create permanent record of dimensions and values
• Interfaces with PC spreadsheets or estimating programs
• New ergonomic design makes it more comfortable to hold, easier to use
• Dual LCD displays show more information

Scale Master® Pro XE makes it easy to do Linear, Area and Volume takeoffs with speed, accuracy and confidence when estimating, bidding or planning. The Scale Master® Pro XE provides transfer capabilities from plans, blueprints and maps as well as out of scale drawings. Utilize 91 built-in Scales; 50 Imperial (Feet-Inch) units and 41 Metric, (including eight custom scales for out-of-scale drawings) for maximum versatility with architectural, engineering and civil scales. 

Advanced Digital Plan Measure with PC Interface

• Complete takeoffs with speed and accuracy
• Reduce errors in estimates and bids
• Improve productivity and maximize profitability
• Create permanent record of dimensions and values
• Interfaces with PC spreadsheets or estimating programs
• New ergonomic design makes it more comfortable to hold, easier to use
• Dual LCD displays show more information

Scale Master® Pro XE makes it easy to do Linear, Area and Volume takeoffs with speed, accuracy and confidence when estimating, bidding or planning. The Scale Master® Pro XE provides transfer capabilities from plans, blueprints and maps as well as out of scale drawings. Utilize 91 built-in Scales; 50 Imperial (Feet-Inch) units and 41 Metric, (including eight custom scales for out-of-scale drawings) for maximum versatility with architectural, engineering and civil scales. 

• Protect your Calculator with this durable case. Rubber base and hard plastic cover will ensure your Calculator is safe and secure.

• Fits models: 3405, 3415, 3430, 4020, 4065, 4080,
  

• Carry your Construction Master® calculator in a top quality rugged nylon Armadillo Gear® Tool Belt Case.  
  
• The well-built utility case is large enough to hold both the Construction Master and the Armadillo Gear protective hard cover, flip-top case (sold separately).  
  
• A reliable steel belt clip secures this convenient, easy-to-access holder. 
  
• Comes in bright, construction orange with black trim with two pencil loops.

• Protect your Scale Master with this durable neoprene case                                                            
  

• Perfect for use with your Scale Master II when not using the hard case.

• This case is provided with the Scale Master Classic