Derringer

     Pins

     Pipe Patterns

     Rapatemps

     Raparounds

     Saddle Sets

     Step Pins

     Tipster

Lee's MIG DERRINGER #MT-1 - The MIG Derringer • A handy mig nozzle reamer/cleaner which uses expanding spring steel blades to quickly remove splatter. • By inserting the tool in mig nozzle and turning, you will be assured of unrestricted gas flow and cleaner, stronger welds. • There is no need to wait for the nozzle to cool before cleaning. • Self adjusting to fit all nozzle sizes.   Base SKU:MT-1 In Stock:Yes Price: $22.00   Quantity:

QUICK RELEASE PINS  • Cut your fit-up time in half.  • A valuable precision tool for pipe fitter/welders.   • Lee's unique 'Quick Release Knob' eliminates tedious turning.   Base SKU: In Stock:Yes Price: $65.00   Quantity:

LEE'S TAPERED PINS #T-250 - Tapered Pins Fabricating pipe with flange fittings? Refineries, shipyards, oilfield construction... you need LEE's Tapered Pins. • Precision molded from light weight high-impact nylon. • For bolt sizes 1/2" thru 1-1/4" • Simple - just insert pin into bolt hole and put other half in place.   Base SKU:T-250 In Stock:Yes Price: $28.00   Quantity:

LEE'S STEP PINS • Have a hard chrome surface to prevent wear and corrosion. • Our steel pins are accurate, strong and durable. • Unique step-tapered design for precise fit up. • Model: B-101 - Hex head - Bolt Sizes: 3/4", 7/8", 1", 1-1/8", 1-1/4", 1-3/8" • Model: B-102 - Machined from round bar- Bolt Sizes: 3/4", 7/8", 1", 1-1/8", 1-1/4" • Model: B-103 - For smaller flanges - Bolt Sizes: 3/8", 1/2", 5/8", 3/4"   Base SKU: In Stock:Yes Price: $51.00   Quantity:

LEE'S COMBO PIPE PATTERNS  Combination Pipe Patterns • Made for pipe 2" through 24". Three sets available: Small, Medium, and Large.  Solve your pipe joining problems easily - LEE's Combination Patterns let you make the most difficult:  • 2-piece 90° • Orange peel • 45° reducer • 3-piece 90° • Eccentric reducer • Concentric reducer • Risers • Saddles • Bull plug • Each pattern is half the circumference of that size pipe. Half the marking is done on one side, the other half marked from the opposite side.     Base SKU: In Stock:Yes Price: $24.00   Quantity:

Magna Patterns #CPM-1 - LEE's Magna Patterns: Made of the same rugged heat resistant material as the Magna Raps. These patterns will cling to the pipe like magic. • Made for pipes 2" through 8". Solve your pipe joining problems easily- LEE's Magna Patterns let you make the most difficult: • 2-piece 90° • Orange peel • 45° reducer • 3-piece 90° • Eccentric reducer • Concentric reducer • Risers • Saddles • Bull plug • Each pattern is half the circumference of that size pipe. Half the marking is done on one side, the other half marked from the opposite side.   Base SKU:CPM-1 In Stock:Yes Price: $28.00   Quantity:

LEE'S RAPATEMP • Available for each pipe size 2" through 10" • Tough, durable, heat-resistant material means years of use. • LEE's RapaTemps are full circumference guides with self- locking velcro tabs. •Accurately engineered and pre-cut for easy layout of most common miter and saddle cuts • Every set contains three miter templates (22 1/2°, 45°, 90°) and two saddle templates (45°, 90°).   Base SKU: In Stock:Yes Price: $22.00   Quantity:

Rapatemps - Saddle Sets • Available for each pipe size 2" through 10" • Tough, durable, heat-resistant material means years of use. • Accurately engineered and pre-cut for easy layout of most common saddle cuts, • LEE's RapaTemps are full circumference guides with self- locking velcro tabs. • Set contains three miter templates (22 1/2°, 45°, 90°) and two saddle templates (45°, 90°).   Base SKU: In Stock:Yes Price: $18.00   Quantity:

LEE'S RAPAROUNDS Much more than just an ordinary raparound! • Made of rugged, heat-resistant material • Can be used as a straight edge, square and scale. • Precision cutting gives a smooth, clean, long-lasting edge for marking. • Decimal equivalents (R-12 & R-18 Only) • It has layouts for 3, 4, 5, and 6 piece 90 degree elbows (R-12 & R-18 Only) • Protractor and other useful information for welders and fitters. (R-12 & R-18 Only)  • All printing in dense black. (R-12 & R-18 Only)   Base SKU: In Stock:Yes Price: $8.00   Quantity:

LEE'S MAGNETIC RAPAROUNDS Just like Lee's Raparounds, but this raparound is MAGNETIC! • Makes accurate pipe layout a cinch. • Made of rugged, heat-resistant material • New high-tech material is self-aligning and "hugs" the pipe. • Flexible Magnetic Raparounds for use with pipe up to 48". • Can be used as a straight edge, square and scale. • Precision cutting gives a smooth, clean, long-lasting edge for marking • Decimal equivalents (M-12 Only) • It has layouts for 3, 4, 5, and 6 piece 90 degree elbows (M-12 Only) • Protractor and other useful information for welders and fitters.(M-12-Only)   Base SKU: In Stock:Yes Price: $10.00   Quantity: