• Indexing/Protractor Base: Mounts on Lens Adapter Base to allow degree indexing when using any of the accessory lenses
• Lens Adapter Base: Mounts securely to any 3D, 880 Gen II, 880 Square, or Inclo-Matic Series Laser to permit interchangeable attachment of accessory lenses.
• Red anodized 2-Way Beam Splitter Lens: Projects a 90-degree dot and straight beam dot simultaneously from the laser unit.It also rotates 360 degrees about the Lens Base and works in conjunction with the Protractor Plate for degree referencing. Fully machined and anodized finish with Penta prism lens system.  
• Green anodized Line Lens:  Spreads the dot from the laser unit approximately 105 degrees to generate a visible laser line.
• Auto Slope Block: Get exact slopes and grades without making calculations. 
• Pin Set A: Allows you to do slopes and grades in just one step. Attach the pins under either end of one of our Mag Bases, or our 3D DMS Gen 1 Laser Level, and you will get the exact measurement you need without any calculations. The set consists of seven precision-made steel pins in 1/16” increments, starting at an eighth up to half an inch. 
• Durable hard plastic case
• All parts are fully machined finished and constructed of the highest quality for professional use.

The combination of these accessories, are able to attach to any of the 3D, 880 Gen II, 880 Square, or Inclo-Matic series Lasers

• Class 3A powerful laser and newly enhanced ergonomic design with a threaded front aperture which allows use of Checkpoint's lens' and other accessories.
• The new high powered laser beam system is accurate 1/4" (.250) at 100' and is 3 dimensionally aligned from all planes of reference, a calibration feature to the Checkpoint Laser Levels.
• The new Ultra Mag Laser Base offers a V-groove bottom to fit radius pipe/conduit work
• 4 neodymium rare earth magnets to add incredible magnetic strength to hold any metal pipe application on the run.
• The Ultra Mag laser base is CNC machined from Billet 6061 aluminum alloy. Color buff polished and aircraft anodized with permanent laser engraving
• Black Only

• 1540- EV300 Torpedo Level
• 300- Ultra Mag Torpedo Level
• 305- Mega Mag
• 0303- Ultra Mini Mag

#312 - The Magnum Mag Base at an even 12" x 1" wide allows for quick layouts and features five neodymium rare-earth magnets, laser engraved Imperial (U.S.) rules and incorporates a "Jack Screw" System to quickly set any intermittent slope/grade. With the ability to hold over 20x its weight, the Magnum Mag Base is a great Compliment to any 660 or 880 series laser torpedo 

• Forged Aircraft Aluminum Body
• Durable Powder Coat Finish
• Two Large Rare Earth Magnets
• Fully Licensed NFL Artwork on Durable Polyurethane Inserts
• Two Fully Incased Degree Vials; 0 degree and 90 degree

• Designed to fit all generations of the Ultra Mag Torpedo Level.                
• Constructed of black, double layered ballistic nylon.
• Heavy duty stitching for durability and fitted for easy removal and a snug fit.
• Fits standard belts up to 2¾”.
• Level not included.

NEW! UPDATED BASE!

Features:

• The Super-Vee Mag Base is specifically designed to be used with the 600 and 880 Pro Series Laser Levels.
• The Super-Vee Mag Base is machined from 6061 T6 Billet Aluminum, aircraft anodized and finished with permanently laser engraved graphics.
• Designed for unsurpassed holding power, 6 rare earth neodymium magnets that allows the Super-Vee Mag Base to hold 30 times its weight
• Only 8 1/2" long.
  
• The V-Groove is integrated with radius ends and corners that allow flush alignments to radius bends and/or corners and self aligns perpendicularly to any pipe utilizing a special designed “Vee-Notch” at the center of the base 90-degrees to the main 135-degree V-groove.
• The Super-Vee Mag Base is a development accessory derived from the demand of electricians, pipe fitters and fabricators in the professional trades sector.
  

•  Case provides a distinctive residence for the 880 series laser level.
•  Case has a steel shell with elegant and rugged leather-like exterior
•  Vacuum formed and lined interior to accommodate an individual 880 series unit
•  Screened logo and graphics make this the perfect display unit for your professional 660 or 880 series

• "Quick Clip" system -The "Quick Clip" is a tough steel plated clip system specially designed to lock securely over standard belts with portable, ease-of-use in mind
• Constructed of black, heavy duty 430 denier nylon pack cloth double sided
• Padded with close cell foam padding
• Double stitched for extra durability 
• It comes stitch-monogrammed with Checkpoint professional logo.
• 12.5 inches in length
• Supplies Limited - Once They're Gone...They're Gone!

• 360 degree function or quadrants in degree capabilities.
• Reads in hundredths (.00) • Percent % or degrees
• 10 unit memory hold • Can be calibrated in the field
• Quick settle time w/in 5 seconds •  Backlight & hold functions
• Alternate zero mode  • .05 degree calibration accuracy 
• Large “readable” LCD panel • Laser reference 3 dimensionally aligned & accuracy of ¼ © 100 ft
• Laser uses 3-AAA batteries & a 9 volt battery for digital use
• Fully billet machined with aircraft anodized 6061 T6 Aluminum
• Completely “bedded” shock and water resistant                 
• Available in Blue or Red Only
  

• 360 degree function or quadrants in degree capabilities. 
• Reads in hundredths (.00) • Percent % or degrees
• 10 unit memory hold • Can be calibrated in the field
• Quick settle time w/in 5 seconds •  Backlight & hold functions
• Alternate zero mode  • .05 degree calibration accuracy
• Large “readable” LCD panel
• Fully billet machined with aircraft anodized 6061 T6 Aluminum
• Completely “bedded” shock and water resistant                 
• Available in Blue & Red

• Neodymium Rare Earth Magnets
• CNC 6061-T6 Machined Aluminum Body
• Accurate from All Phases
• 45 Min Arc Vials
• Ballistic Armor Belt Case
• Precision Alignment, 3/8” @ 100’
• Laser Lasts Up To 10k Hours
• Lifetime Warranty on Body

• 880 Square
• Standard AAA Batteries
• 2-Way Beam Splitter
• Line Lens
• Lens Adapter Base
• 90° Lens
• Protractor Plate
• Bi-pod and Presentation Case provides a unique machine quality squaring system for either "flush" or "off-set" use in 90 degree lock up or adjustable angles.
• Enhanced even further by the new ability to utilize all lens attachments, 90 degree, 2-way and Line lenses creates one of the most innovative useful tools you will ever use as a professional.