 |
| Center Gages |
- Extremely handy for use in grinding and setting screw cutting tools
- Meet the following standards: American National or U.S. 60°, Whitworth or English 55°, and Metric 60°.
- They also have a very useful scale for finding the number of threads per inch through graduations in 14ths, 20ths, 24ths and 32nds of an inch
- Gage also has a table of double depths of threads for determining size of tap drills.
- Made of spring-tempered steel with satin chrome finish.
- Gaging surfaces ground.
|
| |
| Base SKU:C391 |
| In Stock:Yes |
| Price: $20.00 |
| |
|
|
|
|
 |
| Center Punch Set |
| Center Punches w/Round Shanks Starrett No. 117
Center Punches are made of specially selected steel, hardened and properly tempered.
They are well proportioned, nicely finished and have a knurled finger grip.
The points are ground at the proper angle to give maximum service, and the tips are accurately centered.
They are well-proportioned for ease of use.
A special tempering process makes the head less likely to fracture from a hard, off-center blow.
ALWAYS WEAR SAFETY GLASSES WHEN USING STRIKING AND STRUCK TOOLS. |
| |
| Base SKU:S117PC |
| In Stock:Yes |
| Price: $30.00 |
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
| Precision Rule |
- 6" Full Flexible Stainless Rule
- Stainless steel blade with satin chrome finish for quick reading
- The C304R-6 is graduated in 8ths, 16ths, quick reading 32nds and 64ths.
|
| |
| Base SKU:C304R-6 |
| In Stock:Yes |
| Price: $18.00 |
| |
|
|
|
|
|
|
|
 |
| ENGINEERS’ COMBINATION TAPER, WIRE & THICKNESS GAGE |
• English Standard wire gage with sizes from 19-36 (.042-.004”), plus two additional sizes 1/16” & 1/8”.
• The gage measures 1/2” wide x 4 3/4” long and has a locking device to lock any leaf in position.
Consists of a wire gage, a taper gage for assorted slot widths, and an assortment of thickness gage leaves, all folding within a compact steel case.
• The reverse side has decimal equivalents in thousandths, it also has a taper gage leaf for measuring slot widths from 1/64 - 3/16” in 64ths of an inch, the reverse side having a 3” scale graduated in 8ths & 16ths. It has nine thickness leaves:.002, .003, .004, .006, .008, .010, .012, .015 and 1/16”. |
| |
| Base SKU: |
| In Stock:Yes |
| Price: $115.00 |
| |
|
|
|
|
 |
| Hole Gage Set |
- Hole Gage Set( 4) with Vinyl Case
- .125 - .500" (3.2-12.7 mm) range
- These small hole gages are well balanced tools that are ideal for accurately measuring small holes, slots, grooves, and recesses in all kinds of work.
- Accurate measurements are obtained by slightly rocking these gages in the hole to be measured.
- This will guarantee contact at the true diameter.
- The final size is then obtained by measuring over the ball contacts with a micrometer.
|
| |
| Base SKU:S829EZ |
| In Stock:Yes |
| Price: $115.00 |
| |
|
|
|
|
 |
| Machinists Level 4" |
| These levels have ground and graduated main vials. All sizes have a cross test vial except the 4" (100 mm) model. The 12" (300 mm) model also has a plumb vial and the 18" (450 mm) size has a double plumb vial. These vials are adjustable to a positive setting and are housed in a satin chrome brass tube with a friction-fit closing cover to prevent breakage. The base of the levels features an involute groove running the length of the base, which provides a reliable seat for round work such as pipes or shafting. With the cross test vial, it is possible to simultaneously level in both directions. This prevents inaccuracies in the main vial reading caused by canting the level sidewise on round work. The 6" through 18" (150-450 mm) main level vials have graduations that are approximately 80-90 seconds or .005" per foot (0.42 mm per meter). |
| |
| Base SKU:98-4 |
| In Stock:Yes |
| Price: $80.00 |
| |
|
|
|
|
 |
| Machinists Level 6" |
| 6" Machinists Level w/Cross Test Vial
These levels have ground and graduated main vials.
All sizes have a cross test vial except the 4" (100 mm) model.
The 12" (300 mm) model also has a plumb vial and the 18" (450 mm) size has a double plumb vial.
These vials are adjustable to a positive setting and are housed in a satin chrome brass tube with a friction-fit closing cover to prevent breakage.
The base of the levels features an involute groove running the length of the base, which provides a reliable seat for round work such as pipes or shafting.
With the cross test vial, it is possible to simultaneously level in both directions. This prevents inaccuracies in the main vial reading caused by canting the level sidewise on round work.
The 6" through 18" (150-450 mm) main level vials have graduations that are approximately 80-90 seconds or .005" per foot (0.42 mm per meter). |
| |
| Base SKU:98-6 |
| In Stock:Yes |
| Price: $95.00 |
| |
|
|
|
|
 |
| Machinists Level 8" |
| 8" Machinists Level w/Cross Test Vial
These levels have ground and graduated main vials.
All sizes have a cross test vial except the 4" (100 mm) model. The 12" (300 mm) model also has a plumb vial and the 18" (450 mm) size has a double plumb vial.
These vials are adjustable to a positive setting and are housed in a satin chrome brass tube with a friction-fit closing cover to prevent breakage.
The base of the levels features an involute groove running the length of the base, which provides a reliable seat for round work such as pipes or shafting.
With the cross test vial, it is possible to simultaneously level in both directions. This prevents inaccuracies in the main vial reading caused by canting the level sidewise on round work.
The 6" through 18" (150-450 mm) main level vials have graduations that are approximately 80-90 seconds or .005" per foot (0.42 mm per meter) |
| |
| Base SKU:98-8 |
| In Stock:Yes |
| Price: $125.00 |
| |
|
|
|
|
 |
| Machinists Level 12" |
| Machinists Level 12" w/Grnd Sgl plump & CVT
These levels have ground and graduated main vials.
All sizes have a cross test vial except the 4" (100 mm) model. The 12" (300 mm) model also has a plumb vial and the 18" (450 mm) size has a double plumb vial.
These vials are adjustable to a positive setting and are housed in a satin chrome brass tube with a friction-fit closing cover to prevent breakage.
The base of the levels features an involute groove running the length of the base, which provides a reliable seat for round work such as pipes or shafting.
With the cross test vial, it is possible to simultaneously level in both directions. This prevents inaccuracies in the main vial reading caused by canting the level sidewise on round work.
The 6" through 18" (150-450 mm) main level vials have graduations that are approximately 80-90 seconds or .005" per foot (0.42 mm per meter). |
| |
| Base SKU:98-12 |
| In Stock:Yes |
| Price: $170.00 |
| |
|
|
|
|
 |
| Machinists Level 18" |
| Machinists Level 18" w/Grnd Sgl plump & CVT
These levels have ground and graduated main vials.
Cross test vial
18" (450 mm) size has a double plumb vial. These vials are adjustable to a positive setting and are housed in a satin chrome brass tube with a friction-fit closing cover to prevent breakage.
The base of the levels features an involute groove running the length of the base, which provides a reliable seat for round work such as pipes or shafting.
With the cross test vial, it is possible to simultaneously level in both directions. This prevents inaccuracies in the main vial reading caused by canting the level sidewise on round work.
The 6" through 18" (150-450 mm) main level vials have graduations that are approximately 80-90 seconds or .005" per foot (0.42 mm per meter). |
| |
| Base SKU:98-18 |
| In Stock:Yes |
| Price: $265.00 |
| |
|
|
|
|
|
|
|
 |
| Outside Micrometer |
• Graduation .001"
• Satin Chrome finish
• Advanced sleeve design
• Distinct figures for precise easy readability
• Balanced frame and thimble design
• Ring-type knurled lock nut for quick sure locking
• Tapered frame design for use in narrow slots and tight pla |
| |
| Base SKU:436P-1 |
| In Stock:Yes |
| Price: $105.00 |
| |
|
|
|
|
 |
| Pocket Slide Calipers |
• 5"(130mm) readings
• Caliper is made of fine quality stainless steel.
• Handy inch or millimeter scale on back of stock.
• Knurled thumb pieces to activate slide.
• A slide stop prevents tool from being disassembled
• Straight measuring surface for outside measuring and rounded nibs for inside or hole measures.
• Accurate readings for both inside & outside measurements are made directly from the 2 lines marked “In” & “Out” on one side of the stock. |
| |
| Base SKU:1025ME-130 |
| In Stock:Yes |
| Price: $165.00 |
| |
|
|
|
|
|
|
|
|
|
|
 |
| Taper Gages |
-
Graduation .001
-
Range: .100-.500"
-
Gages are for determining hole sizes in dies and all kinds of other work.
-
They read in thousandths of an inch or 0.02 mm.
-
Made of tempered steel, they have a locking device for fixing any leaf in position for use. |
| |
| Base SKU:269A |
| In Stock:Yes |
| Price: $105.00 |
| |
|
|
|
|
Starrett
