Clamps

     Gauges

     Framing Squares

     Levels

     Line Up Pins

     Pipefitters Square

     Protractors

     Space Wedges

Mini Fit Clamp #D230-A - Mini Fit Clamp (Fits 1/4" to 4" pipe) Mathey Dearman’s Mini Fit Clamp is the fledgling son of the Chain Clamp design family. Modeled after its sibling the Single Jackscrew Chain Clamp, the Mini Fit is the perfect tool for aligning small diameter tubes, pipes, and fittings. • The clamp is extremely lightweight and easy to set up and adjust (no special tools required). • Brass jackscrews are designed to avoid pipe marking and scarring and stainless steel versions are also available. • Add or remove chain and jackbars as needed for larger or smaller pipes.    Base SKU:D230-A In Stock:Yes Price: $325.00   Quantity:

Mini Fit Clamp Fits 3/4" to 8" #D230 - Mini Fit Clamp (Fits 3/4" to 8" pipe) Mathey Dearman’s Mini Fit Clamp is the fledgling son of the Chain Clamp design family. Modeled after its sibling the Single Jackscrew Chain Clamp, the Mini Fit is the perfect tool for aligning small diameter tubes, pipes, and fittings. • The clamp is extremely lightweight and easy to set up and adjust (no special tools required). • Brass jackscrews are designed to avoid pipe marking and scarring and stainless steel versions are also available. • Add or remove chain and jackbars as needed for larger or smaller pipes.    Base SKU:D230 In Stock:Yes Price: $325.00   Quantity:

Q.C. Welders Gauge English #D253-E - Q.C. Welders Gauge (English) The English Quality Control (Q.C.) Welder's Gauges rapidly and accurately measures pipe • “Hi-Lo” and plate mismatch before and after weld tack up to minimize weld rejections. • The Brass Wedge shaped end placed between the two adjoining surfaces accurately measure weld gap. • The piano wires in square end placed through the weld gap measures pipe inside diameter or plate “Hi-Lo” to minimize radiographic rejections.   Base SKU:D253-E In Stock:Yes Price: $32.00   Quantity:

Q.C. Welders Gauge Metric #D253-M - Q.C. Welders Gauge (Metric) The Metric Quality Control (Q.C.) Welder's Gauges rapidly and accurately measures pipe • “Hi-Lo” and plate mismatch before and after weld tack up to minimize weld rejections. • The Brass Wedge shaped end placed between the two adjoining surfaces accurately measure weld gap. • The piano wires in square end placed through the weld gap measures pipe inside diameter or plate “Hi-Lo” to minimize radiographic rejections.   Base SKU:D253-M In Stock:Yes Price: $32.00   Quantity:

Pit Depth Guage #D254 #D254 - Pit Depth Guage This accessory guage mounts on the Q.C. Welders Guage. • Measures pit depth • Measures weld height and Hi-Lo Q.C. Guage Welders sold separately   Base SKU:D254 In Stock:Yes Price: $12.00   Quantity:

Small Framing Square(Stainless Steel) #D256 • Small Framing Square Used to measure squareness of one point to another, angles and to find pipe centerline • When used with a level, this square can measure drop of inches per foot to determine degrees of slope. • Small square blade lengths 8-12” • The Small Framing Square measurement is in 1/8” increments • Made from stainless steel       Base SKU:D256 In Stock:Yes Price: $30.00   Quantity:

Large Aluminum Framing Square #D241 • Large Framing Square Used to measure squareness of one point to another, angles and to find pipe centerline • When used with a level, this square can measure drop of inches per foot to determine degrees of slope. • Large square blade lengths 16-24” • The Large Framing Square measurement is in 1/16” increments • Made from Aluminum     Base SKU:D241 In Stock:Yes Price: $24.00   Quantity:

Two Hole Leveler #D252 • Two Hole Leveler Makes flange fitups quicker & easier. • Adjustable spring-loaded pins are inserted into flange holes, then rotated until bubble indicates a level position. • Bubble level checks vertical and horizontal alignment of flanges. • Distance between center to center of flange holes = 2 1/4 - 12 in. • Fits flange bolt hole diameters of 5/8” - 1 1/4 inches.   Base SKU:D252 In Stock:Yes Price: $85.00   Quantity:

Flange Line Up Pin(Set) #05-0100-010 - Wobble Nut Flange Line Up Pins A pair of Mathey Dearman Flange Line Up Pins and a spirit level will set precise two-hole horizontal alignment for welding flange assemblies. • The cone shaped end piece automatically centers on the bolt holes, regardless of bolt hole diameter. • Expansion springs allow pins to give as flanges expand during heating. • Sold in pairs.    Base SKU:05-0100-010 In Stock:Yes Price: $115.00   Quantity:

Flange Line Up Pin(Set) #05-0100-000 - Slide Locking Flange Line Up Pins (Set of 2) A pair of Mathey Dearman Flange Line Up Pins and a torpedo level will set precise two-hole horizontal alignment for welding flange assemblies. • The cone-shaped end piece automatically centers on the bolt holes. • The Flange Line Up Pins will fit bolt diameter 5/8” to 1 7/8”. • Expansion springs allow pins to give as flanges expand during heating.  • The slide-lock locking FLUPs are fast to set up. • Stainless steel standard. The Slide-lock locking ends slip on and off quickly and easily, and facilitates quick movement from flange to flange – especially when “tacking only” for the first pass.   Base SKU:05-0100-000 In Stock:Yes Price: $115.00   Quantity:

The Pipefitter’s Square #D248 - The Pipefitter’s Square Marked with information to make or measure: • Arcs • Angles • Tangents • Saddles • Miters • Diagonal joints and Y joints. Use it to determine: • Pipe center line • Bolt length for flanges • Number of required bolt holes for flanges • Pipe circumference Any of our squares can measure drop of inches per foot to determine pipe angle in degrees. • Pipefitter’s Square is 15-1/2”x24   Base SKU:D248 In Stock:Yes Price: $85.00   Quantity:

Mini Protractor 4"/25.4mm #DXX-250 - Mini Protractor  (4" / 25.4mm) • The Mini Protractor measures angles and features a four-inch scale. • Ideal for measuring bevel angle on pipe ends. • The small protractor includes instructions for use engraved on reverse side. • Made of Stainless Steel    Base SKU:DXX-250 In Stock:Yes Price: $15.00   Quantity:

Large Protractor #DK-100 - Large Protractor  (36"/ 48") • One side of the 36” base arm is etched with a 0”- 36” ruler graduated in 1/16” of an inch and the other side is etched with a 0”- 36” ruler graduated in 1/8” of an inch. • One side of the 48” base arm is etched with a 0”- 48” ruler graduated in 1/16” of an inch and the other side is etched with a 0”- 48” ruler graduated in 1/8” of an inch. • The protractor heads have double graduations from 0 L - 180 L in opposite directions. • Made of Aluminum • Accuracy: (+/- 1 degree) • Made of Stainless Steel   Base SKU:DK-100 In Stock:Yes Price: $225.00   Quantity:

Protractor Small 18"/457mm #DK-239 - Small Protractor (18" / 457mm) • The Small Protractor has a base arm measuring 12” (305mm) and an adjustable arm measuring 18” (457mm). • The 12” arm has one side etched with 0”- 12” ruler graduated in 1/16” of an inch and the other side etched in millimeters to 10 centimeters. • One side of the 18” arm is etched with a 0”- 18” ruler graduated in 1/16” of an inch and the other side etched in millimeters to 15 centimeters. • Made of Stainless Steel   Base SKU:DK-239 In Stock:Yes Price: $55.00   Quantity:

Spacing Wedge 8 x 1.5 x 1/4  Spacing Wedges (8 x 1.5 x 1/4) • Use spacing wedges to spread pipe to set the welding gap. • All sizes have a maximum thickness of 1/4” which tapers to a knife edge. • Made of spring steel, hardened to “40’42” “RC”.   Base SKU:D271 In Stock:Yes Price: $20.00   Quantity:

Spacing Wedge 3.5 x 1.5 x 1/4  Spacing Wedges (3.5 x 1.5 x 1/4) • Use spacing wedges to spread pipe to set the welding gap. • All sizes have a maximum thickness of 1/4” which tapers to a knife edge. • Made of spring steel, hardened to “40’42” “RC”.   Base SKU:D272 In Stock:Yes Price: $18.00   Quantity: